Publications

Journal articles and book chapters are grouped by type and listed from newest to oldest within each group.

Publication profiles:  Google Scholar  ·  Scopus  ·  ORCID  ·  Web of Science  ·  AVESİS  ·  ResearchGate

Articles in SCI-⁠E Journals

66 articles · 2010–2026

1. Influence of Pulse Number on Nugget Formation and Joint Performance in Resistance Spot-Welded 2 GPa Press-Hardened Steel

   Ü Kıskıç, O Muratal, S Demir, D Atabek, O Yöntem, R Yamanoğlu
   Crystals 16(10), 600  ·  2026  ·  DOI

    

2. A comprehensive study on the optimization of laser welding process parameters for electric vehicle battery interconnections

   AA Yıldırım, E Feyzullahoğlu, R Yamanoğlu
   Welding in the World  ·  2026  ·  DOI

    

3. Optimization of Industrial Hot-Stamping Parameters for 35MnB5 Steel with Balanced Strength and Toughness

   E Barut, A Akdoğan Eker, A Avcı, R Yamanoğlu
   Journal of Materials Engineering and Performance 35(22), 22151–⁠22162  ·  2026  ·  DOI

    

4. Comparatives structural and mechanical assessment of hot forged and hot press sintered 1%-⁠Mo 16MnCr5 case hardening steel

   A Gani, S Boudebane, C Boukhalfa, R Yamanoğlu, A Grairia, S Lemboub, H Benzouid
   The International Journal of Advanced Manufacturing Technology 142, 6411–⁠6424  ·  2026  ·  DOI

    

5. Effects of dipping time on color parameters, elemental composition and resin cement bonding of monolithic zirconia

   B Kanat-Ertürk, C Akarsu, G Zengin, FG Koç, R Yamanoğlu
   The Journal of Advanced Prosthodontics 18(5), 436–⁠447  ·  2026  ·  DOI

    

6. Effect of Recycling Cobalt-Chromium Alloy Powder on Metal-Ceramic Bond Strength and Microstructure

   I Guluzade, H Albayrak, R Yamanoğlu, HI Yavuz, M Ayata
   The International Journal of Prosthodontics  ·  2026  ·  DOI

    

7. Tailoring mechanical properties of Ag-modified AlSi10Mg alloys by vacuum hot pressing

   O Muratal, HI Yavuz, O Yöntem, D Atabek, R Yamanoğlu
   Materials Research Express 12(12), 126510  ·  2025  ·  DOI

    

8. High-energy ball milling and pressure-assisted sintering of Ti-⁠6Al-⁠4 V alloy: a powder design approach for controlled microstructure, enhanced mechanical properties, and improved wear resistance

   C Boukhalfa, M Fellah, M Baccouche, R Yamanoğlu, İ Gökalp, AA Zegai, A Gani
   The International Journal of Advanced Manufacturing Technology 141, 3259–⁠3270  ·  2025  ·  DOI

    

9. A Novel Radially Graded Hydroxyapatite-Based Composite for Bioactive Implant Interfaces

   Z Coşkun Taş, T Çelik, İ Mutlu, R Yamanoğlu, L Anguilano
   Journal of Biomedical Materials Research Part A 113(11), e38007  ·  2025  ·  DOI

    

10. Comparative Effects of Fine and Conventional Shot Peening on Surface Morphology, Topography, Wettability, and Antibacterial Activity of Biomedical Ti6Al4V Alloy

    E Avcu, M Güney, Y Yıldıran Avcu, M Sulak, H Uzuner, M İlçe Bahadır, E Abakay, M Armağan, R Yamanoğlu, Ç Elibol, MFX Wagner
    Coatings 15(9), 1071  ·  2025  ·  DOI

     

11. Effect of hatch distance on porcelain bond strength of metal frameworks produced by selective laser melting

    T Sezer, H Albayrak, M Ayata, HI Yavuz, R Yamanoğlu
    Journal of Prosthetic Dentistry 134(2), 469.e1–⁠469.e8  ·  2025  ·  DOI

     

12. Modification of surface and subsurface properties of cold-rolled Ti6Al4V sheets through water jet shot peening

    E Avcu, M Armağan, Y Yıldıran Avcu, E Abakay, E Çalım, FG Koç, M Güney, R Yamanoğlu
    Materials Research Express 12(1), 016503  ·  2025  ·  DOI

     

13. Magnetron Sputtering of Antibacterial and Antifungal Tantalum-Copper and Niobium-Copper Coatings on Three Dimensional-Printed Porous Titanium Alloy Scaffolds: Part I

    B Azamatov, A Borisov, B Maratuly, D Dogadkin, Y Safarova (Yantsen), R Yamanoğlu, D Alontseva
    Johnson Matthey Technology Review 69(1), 76–⁠87  ·  2025  ·  DOI

     

14. Improving Corrosion and Wear Resistance of 316L Stainless Steel via In Situ Pure Ti and Ti6Al4V Coatings: Tribocorrosion and Electrochemical Analysis

    D Alontseva, HI Yavuz, B Azamatov, F Khoshnaw, Y Safarova (Yantsen), D Dogadkin, E Avcu, R Yamanoğlu
    Materials 18(3), 553  ·  2025  ·  DOI

     

15. Magnetron Sputtering of Antibacterial and Antifungal Tantalum-Copper and Niobium-Copper Coatings on Three Dimensional-Printed Porous Titanium Alloy Scaffolds: Part II

    B Azamatov, D Dogadkin, B Maratuly, A Borisov, Y Safarova (Yantsen), R Yamanoğlu, D Alontseva
    Johnson Matthey Technology Review 69(1), 88–⁠98  ·  2025  ·  DOI

     

16. Effect of Ni aids on the unlubricated tribological behaviour of WC cemented carbides fabricated by pressureless infiltration of Cu alloy binder

    A Mameri, I Daoud, A Rezzoug, AR Boukantar, D Miroud, R Yamanoğlu, AL Ortiz
    Ceramics International 51(3), 3115–⁠3125  ·  2025  ·  DOI

     

17. Microplasma-Sprayed Titanium and Hydroxyapatite Coatings on Ti6Al4V Alloy: in vitro Biocompatibility and Corrosion Resistance: Part II

    D Alontseva, Y Safarova (Yantsen), S Voinarovych, A Obrosov, R Yamanoğlu, F Khoshnaw, A Nessipbekova, A Syzdykova, HI Yavuz, S Kaliuzhnyi, A Krasavin, B Azamatov, A Khozhanov, F Olzhayev, S Weiß
    Johnson Matthey Technology Review 69(1), 59–⁠75  ·  2025  ·  DOI

     

18. Microplasma-Sprayed Titanium and Hydroxyapatite Coatings on Ti6Al4V Alloy: in vitro Biocompatibility and Corrosion Resistance: Part I

    D Alontseva, Y Safarova (Yantsen), S Voinarovych, A Obrosov, R Yamanoğlu, F Khoshnaw, A Nessipbekova, A Syzdykova, HI Yavuz, S Kaliuzhnyi, A Krasavin, B Azamatov, A Khozhanov, F Olzhayev, S Weiß
    Johnson Matthey Technology Review 69(1), 45–⁠58  ·  2025  ·  DOI

     

19. A New Approach to Titanium-Hydroxyapatite-Bio Composite: Pressure-Assisted Coating on the Antibacterial and Electrochemical Properties of Ti6Al4V

    R Yamanoğlu, D Alontseva, A Bahador, H Uzuner, F Khoshnaw, O Muratal, S Gümüş, HI Yavuz, Y Özdemir
    Johnson Matthey Technology Review 69(1), 126–⁠138  ·  2025  ·  DOI

     

20. Microstructural, Mechanical, and Tribological Properties of Selective Laser Melted Inconel 718 Alloy: The Influences of Heat Treatment

    ÜG Başçı, E Avcu, M Kıraç, A Sever, İ Gökalp, HI Yavuz, S Oktay, E Abakay, Y Yıldıran Avcu, R Yamanoğlu
    Crystals 15(1), 18  ·  2025  ·  DOI

     

21. Characterization of corrosion products formed in high-strength dual-phase steels under an accelerated corrosion test

    D Giray, MŞ Sönmez, R Yamanoğlu, HI Yavuz, O Muratal
    Engineering Science and Technology, an International Journal 57, 101796  ·  2024  ·  DOI

     

22. Impact of Cu and Ce on the electrochemical, antibacterial, and wear properties of 316 L stainless steel: Insights for biomedical applications

    R Yamanoğlu, AT Petkoska, HI Yavuz, H Uzuner, M Drienovsky, I Nasov, F Khoshnaw
    Materials Today Communications 40, 109442  ·  2024  ·  DOI

     

23. Biocompatibility and Corrosion of Microplasma-Sprayed Titanium and Tantalum Coatings versus Titanium Alloy

    D Alontseva, Y Safarova (Yantsen), S Voinarovych, A Obrosov, R Yamanoğlu, F Khoshnaw, HI Yavuz, A Nessipbekova, A Syzdykova, B Azamatov, A Khozhanov, S Weiß
    Coatings 14(2), 206  ·  2024  ·  DOI

     

24. Milling parameter optimization for the refinement of NiO/Al mixtures and the synthesis of Ni/Al2O3 nanocomposites

    NEH Berramdan, H Boutefnouchet, M Zidani, R Yamanoğlu, C Curfs
    Journal of Mining and Metallurgy, Section B: Metallurgy 60(1), 45–⁠58  ·  2024  ·  DOI

     

25. Corrosion Behavior of Shot-Peened Ti6Al4V Alloy Produced via Pressure-Assisted Sintering

    E Avcu, E Abakay, Y Yıldıran Avcu, E Çalım, İ Gökalp, E Iakovakis, FG Koç, R Yamanoğlu, A Akıncı, M Güney
    Coatings 13(12), 2036  ·  2023  ·  DOI

     

26. Support recycling in additive manufacturing: A case study for enhanced wear performance of Ti6Al4V alloy

    R Yamanoğlu, A Bahador, K Kondoh
    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 237(7), 1603–⁠1608  ·  2023  ·  DOI

     

27. Characterization of Ti4Al4Mo/SiC composite produced by pressure-assisted sintering

    R Yamanoğlu, A Bahador, K Kondoh, C Duran, Y Akyıldız, Y Özdemir, O Öztürk
    Bulletin of Materials Science 46(2), 104  ·  2023  ·  DOI

     

28. The influence of alloying elements on tribological properties of Fe-⁠Cu-⁠C based metal matrix composite bearing materials produced by powder metallurgy

    HI Yavuz, B Eyri, R Yamanoğlu, E Feyzullahoğlu
    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 237(2), 288–⁠299  ·  2023  ·  DOI

     

29. Influence of micro crystalline cellulose on EPDM-based automotive sealing profile

    B Poyraz, Y Güner, T Yardım, R Yamanoğlu, A Tozluoğlu, S Durmuş, M Şen
    Journal of Elastomers & Plastics 55(1), 28–⁠45  ·  2023  ·  DOI

     

30. Surface and Tribological Properties of Powder Metallurgical Cp-⁠Ti Titanium Alloy Modified by Shot Peening

    Y Yıldıran Avcu, E Iakovakis, M Güney, E Çalım, A Özkılınç, E Abakay, F Sönmez, FG Koç, R Yamanoğlu, A Cengiz, E Avcu
    Coatings 13(1), 89  ·  2023  ·  DOI

     

31. Lignin in place of carbon black for ethylene-propylene-diene-monomer based automotive sealing profiles

    B Poyraz, Y Güner, A Tozluoğlu, R Yamanoğlu, Z Candan, M Şen
    BioResources 17(4), 5905–⁠5918  ·  2022  ·  DOI

     

32. Tribological properties of in situ oxide reinforced nickel matrix composites produced by pressure-assisted sintering

    A Mameri, I Daoud, A Rezzoug, S Azem, R Yamanoğlu
    The International Journal of Advanced Manufacturing Technology 120(5-6), 3731–⁠3740  ·  2022  ·  DOI

     

33. Fabrication Methods of Porous Titanium Implants by Powder Metallurgy

    R Yamanoğlu, A Bahador, K Kondoh
    Transactions of the Indian Institute of Metals 74(11), 2555–⁠2567  ·  2021  ·  DOI

     

34. Ultrafine-grain formation and improved mechanical properties of novel extruded Ti-⁠Fe-⁠W alloys with complete solid solution of tungsten

    A Bahador, J Umeda, R Yamanoğlu, A Amrin, A Alhazaa, K Kondoh
    Journal of Alloys and Compounds 875, 160031  ·  2021  ·  DOI

     

35. Strength–ductility balance of powder metallurgy Ti–2Fe–2W alloy extruded at high-temperature

    A Bahador, A Issariyapat, J Umeda, R Yamanoğlu, C Pruncu, A Amrin, K Kondoh
    Journal of Materials Research and Technology 14, 677–⁠691  ·  2021  ·  DOI

     

36. New Magnesium Composite with Mg17Al12 Intermetallic Particles

    R Yamanoğlu, A Bahador, K Kondoh, S Gümüş, S Gökçe, O Muratal
    Powder Metallurgy and Metal Ceramics 60(3-4), 216–⁠224  ·  2021  ·  DOI

     

37. Effect of Mo Addition on the Mechanical and Wear Behavior of Plasma Rotating Electrode Process Atomized Ti6Al4V Alloy

    R Yamanoğlu, A Bahador, K Kondoh
    Journal of Materials Engineering and Performance 30(5), 3203–⁠3212  ·  2021  ·  DOI

     

38. Pressure assisted bonding process of stainless steel on titanium alloy using powder metallurgy

    F Khoshnaw, R Yamanoğlu, ÜG Başçı, O Muratal
    Materials Chemistry and Physics 259, 124015  ·  2021  ·  DOI

     

39. Microstructure globularization of high oxygen concentration dual-phase extruded Ti alloys via powder metallurgy route

    A Bahador, J Umeda, H Ghandvar, TA Abu Bakar, R Yamanoğlu, A Issariyapat, K Kondoh
    Materials Characterization 172, 110855  ·  2021  ·  DOI

     

40. Strengthening evaluation and high-temperature behavior of Ti–Fe–O–Cu–Si alloy

    A Bahador, J Umeda, R Yamanoğlu, TA Abu Bakar, K Kondoh
    Materials Science and Engineering: A 800, 140324  ·  2021  ·  DOI

     

41. Deformation mechanism and enhanced properties of Cu–TiB2 composites evaluated by the in-situ tensile test and microstructure characterization

    A Bahador, J Umeda, R Yamanoğlu, H Ghandvar, A Issariyapat, TA Abu Bakar, K Kondoh
    Journal of Alloys and Compounds 847, 156555  ·  2020  ·  DOI

     

42. Effect of silver content on the wear and mechanical properties of powder metallurgical Ti-⁠5Al-⁠2.5Fe-⁠xAg alloys

    R Yamanoğlu, F Khoshnaw, I Daoud, E Efendi
    Journal of Mining and Metallurgy, Section B: Metallurgy 56(1), 119–⁠125  ·  2020  ·  DOI

     

43. Physicomechanical Properties of Porous Materials by Spark Plasma Sintering

    A Azarniya, A Azarniya, MS Safavi, MF Ahmadipour, ME Seraji, S Sovizi, M Saqaei, R Yamanoğlu, M Soltaninejad, HRM Hosseini, S Ramakrishna, A Kawasaki, S Adams, MV Reddy
    Critical Reviews in Solid State and Materials Sciences 45(1), 22–⁠65  ·  2020  ·  DOI

     

44. Pressureless Spark Plasma Sintering: A Perspective from Conventional Sintering to Accelerated Sintering Without Pressure

    R Yamanoğlu
    Powder Metallurgy and Metal Ceramics 57(9-10), 513–⁠525  ·  2019  ·  DOI

     

45. Titanium-⁠304L Stainless Steel Joining by Powder Metallurgical Uniaxial Pressing under Vacuum Conditions

    MB Telli, R Yamanoğlu, HG Şanlı
    Acta Physica Polonica A 134(1), 37–⁠40  ·  2018  ·  DOI

     

46. Spark plasma sintering versus hot pressing – densification, bending strength, microstructure, and tribological properties of Ti5Al2.5Fe alloys

    R Yamanoğlu, I Daoud, EA Olevsky
    Powder Metallurgy 61(2), 178–⁠186  ·  2018  ·  DOI

     

47. Production and mechanical properties of Ti–5Al–2.5Fe–xCu alloys for biomedical applications

    R Yamanoğlu, E Efendi, F Kolaylı, H Uzuner, I Daoud
    Biomedical Materials 13(2), 025013  ·  2018  ·  DOI

     

48. Failure analysis of wire-breaks in aluminum conductor production and investigation of early failure reasons for transmission lines

    S Karabay, AT Ertürk, M Zeren, R Yamanoğlu, E Karakulak
    Engineering Failure Analysis 83, 47–⁠56  ·  2018  ·  DOI

     

49. Microstructure characterization and quantitative analysis of copper alloy matrix composites reinforced with WC-xNi powders prepared by spontaneous infiltration

    I Daoud, D Miroud, R Yamanoğlu
    Journal of Mining and Metallurgy, Section B: Metallurgy 54(2), 169–⁠177  ·  2018  ·  DOI

     

50. Production of porous Ti5Al2.5Fe alloy via pressureless spark plasma sintering

    R Yamanoğlu, N Gülsoy, EA Olevsky, HÖ Gülsoy
    Journal of Alloys and Compounds 680, 654–⁠658  ·  2016  ·  DOI

     

51. Mechanical properties of hypoeutectic Al-⁠Ni alloys with Al3Ni intermetallics

    E Karakulak, FG Koç, R Yamanoğlu, M Zeren
    Materials Testing 58(2), 117–⁠121  ·  2016  ·  DOI

     

52. Enhanced surface properties of iron by in situ hard nickel coating

    R Yamanoğlu, E Efendi
    Materials Testing 58(2), 151–⁠154  ·  2016  ·  DOI

     

53. In Situ Aluminum Alloy Coating on Magnesium by Hot Pressing

    R Yamanoğlu
    Acta Metallurgica Sinica (English Letters) 28(8), 1059–⁠1064  ·  2015  ·  DOI

     

54. Characterisation of nickel alloy powders processed by spark plasma sintering

    R Yamanoğlu, WL Bradbury, E Karakulak, EA Olevsky, RM German
    Powder Metallurgy 57(5), 380–⁠386  ·  2014  ·  DOI

     

55. Investigation of corrosion and mechanical properties of Al–Cu–SiC–xNi composite alloys

    E Karakulak, R Yamanoğlu, U Erten, A Zeren, S Zor, M Zeren
    Materials & Design 59, 33–⁠37  ·  2014  ·  DOI

     

56. Production and characterization of Al-xNi in situ composites using hot pressing

    R Yamanoğlu
    Journal of Mining and Metallurgy, Section B: Metallurgy 50(1), 45–⁠52  ·  2014  ·  DOI

     

57. Effect of nickel on microstructure and wear behaviour of pure aluminium against steel and alumina counterfaces

    R Yamanoğlu, E Karakulak, M Zeren, FG Koç
    International Journal of Cast Metals Research 26(5), 289–⁠295  ·  2013  ·  DOI

     

58. Sintering and microstructure characteristics of 42CrMo4 steel processed by spark plasma sintering

    R Yamanoğlu, WL Bradbury, EA Olevsky, RM German
    Metals and Materials International 19(5), 1029–⁠1034  ·  2013  ·  DOI

     

59. Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy

    S Fidan, E Avcu, E Karakulak, R Yamanoğlu, M Zeren, T Sınmazçelik
    Materials Science and Technology 29(9), 1088–⁠1094  ·  2013  ·  DOI

     

60. Effect of heat treatment on the tribological properties of Al–Cu–Mg/nanoSiC composites

    R Yamanoğlu, E Karakulak, A Zeren, M Zeren
    Materials & Design 49, 820–⁠825  ·  2013  ·  DOI

     

61. Effect of heat treatment conditions on microstructure and wear behaviour of Al4Cu2Ni2Mg alloy

    E Karakulak, M Zeren, R Yamanoğlu
    Transactions of Nonferrous Metals Society of China 23(7), 1898–⁠1904  ·  2013  ·  DOI

     

62. Comparative evaluation of densification and grain size of ZnO powder compacts during microwave and pressureless spark plasma sintering

    R Yamanoğlu, WL Bradbury, EA Olevsky, RM German
    Advances in Applied Ceramics 111(7), 422–⁠426  ·  2012  ·  DOI

     

63. Solidification characteristics of atomized AlCu4Mg1-⁠SiC composite powders

    R Yamanoğlu, M Zeren, RM German
    Journal of Mining and Metallurgy, Section B: Metallurgy 48(1), 73–⁠79  ·  2012  ·  DOI

     

64. Mechanical and wear properties of pre-alloyed molybdenum P/M steels with nickel addition

    R Yamanoğlu, E Karakulak, M Zeren
    Journal of Mining and Metallurgy, Section B: Metallurgy 48(2), 251–⁠258  ·  2012  ·  DOI

     

65. Microstructural investigation of as cast and PREP atomised Ti–6Al–4V alloy

    R Yamanoğlu, RM German, Ş Karagöz, WL Bradbury, M Zeren, W Li, EA Olevsky
    Powder Metallurgy 54(5), 604–⁠607  ·  2011  ·  DOI

     

66. Effect of Nickel Addition and Porosity on Fracture Behaviour of Molybdenum Alloyed Powder Metallurgical Steel

    Ş Karagöz, R Yamanoğlu, A Yılmaz, ŞH Atapek
    Materials Testing 52(4), 227–⁠233  ·  2010  ·  DOI

     

Other Peer-Reviewed Journal Articles

31 articles · ESCI, Scopus, TR Dizin and other peer-reviewed journals

1. Production of Ni-⁠Hard alloy powders by gas atomization

   O Muratal, R Yamanoğlu, C Duran, Y Gönülalan, Y Akyıldız, FG Koç, B Barutçuoğlu
   International Journal of 3D Printing Technologies and Digital Industry 8(1), 124–⁠129  ·  2024  ·  DOI

    

2. Effect of laser energy density on porosity and microstructural features of Inconel 625 alloy produced by selective laser melting

   R Yamanoğlu, E Avcu, HI Yavuz, M Kıraç, ÜG Başçı, EF Sevinç, E Bayram
   Journal of Advances in Manufacturing Engineering 5(2), 84–⁠93  ·  2024  ·  DOI

    

3. Coating for medical application produced by microplasma spraying from Zr–Nb alloy

   SY Maksymov, SG Voinarovych, SN Kaliuzhnyi, ON Kyslytsia, IS Sviridova, D Alontseva, R Yamanoğlu
   The Paton Welding Journal No. 12, 3–⁠9  ·  2024  ·  DOI

    

4. A Review on the Properties of β Type Ti Alloys: Microstructure, Mechanical, Corrosion Properties and Production Methods

   HI Yavuz, R Yamanoğlu
   Politeknik Dergisi 26(4), 1601–⁠1620  ·  2023  ·  DOI

    

5. Ultrasonik atomizasyon: toz üretiminde alternatif bir yol

   Y Akyıldız, S Sarı, OF Kaya, R Yamanoğlu
   İmalat Teknolojileri ve Uygulamaları 4(2), 81–⁠91  ·  2023  ·  DOI

    

6. Effect of Intercritical Annealing on the Properties of Dual Phase Steel via Finite Element Method

   A Akman, Y Akyıldız, R Yamanoğlu
   Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 27(1), 103–⁠106  ·  2023  ·  DOI

    

7. Investigating the effect of heat treatment on the cold forging of 27MnB4 steel via CALPHAD methodology and FEM

   Y Akyıldız, Ü Kutsal, Y Arslan, A Akman, A Karkınlı, M Sağlam, R Yamanoğlu
   Konya Journal of Engineering Sciences 11(1), 59–⁠70  ·  2023  ·  DOI

    

8. Al6061 Talaşının Toz Metalurjisi ile Geri Kazanımı

   HI Yavuz, R Yamanoğlu, ÜG Başçı
   Düzce Üniversitesi Bilim ve Teknoloji Dergisi 10, 1689–⁠1700  ·  2022

    

9. Al-⁠7Si-⁠0.3Mg Alaşımının Isıl İşlem Prosesinin Calphad Metodolojisi ile Modellenmesi ve Simülasyonu

   Y Akyıldız, B Simsar, Ü Kutsal, Y Arslan, A Akman, A Karkınlı, R Yamanoğlu
   Kocaeli Üniversitesi Fen Bilimleri Dergisi 5(2), 75–⁠79  ·  2022  ·  DOI

    

10. Havuz Fotopolimerizasyonu (HFP) ile Eklemeli İmalat

    ÜG Başçı, R Yamanoğlu
    Düzce Üniversitesi Bilim ve Teknoloji Dergisi 10(2), 914–⁠928  ·  2022  ·  DOI

     

11. Network distribution of molybdenum among pure titanium powders for enhanced wear properties

    R Yamanoğlu
    Metal Powder Report 76(1), 32–⁠39  ·  2021  ·  DOI

     

12. β-type Ti Alloys for Biomedical Applications

    HI Yavuz, R Yamanoğlu
    Annals of Advanced Biomedical Sciences 3(2)  ·  2020  ·  DOI

     

13. Toz metalurjisi ile biyomedikal Ti5Ag alaşımının üretimi

    R Yamanoğlu, S Karayünlü Bozbaş, F Kolaylı, S Erkan, H Uzuner, O Muratal
    EJONS International Journal of Mathematic, Engineering and Natural Sciences 4(15), 549–⁠559  ·  2020  ·  DOI

     

14. Antibacterial properties of stainless steel coated on Ti6Al4V alloy

    R Yamanoğlu, F Khoshnaw, F Kolaylı, H Uzuner
    International Journal of Mechanical and Production Engineering 7(9), 53–⁠56  ·  2019

     

15. Sıcak Pres ile Üretilmiş Al-⁠Nano SiC Kompozitin Mekanik Özelliklerinin İncelenmesi

    R Yamanoğlu, E Efendi
    Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 23(2), 597–⁠600  ·  2019  ·  DOI

     

16. Alümina Katkılı ve Nikel ile Alaşımlandırılmış Alüminyum Esaslı Kompozitlerde Özelliklerin Karakterizasyonu

    N Sak, M Zeren, R Yamanoğlu
    Kocaeli Üniversitesi Fen Bilimleri Dergisi 1(1), 1–⁠7  ·  2018

     

17. Effect of recycled polyethylene on storability of hazardous waste incinerator fly ashes: Towards a new composite material

    MK Korucu, R Yamanoğlu, E Karakulak, T Yılmaz, NG Karslı Yılmaz
    Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 24(3), 506–⁠511  ·  2018  ·  DOI

     

18. Tribological study of copper alloy-based composites reinforced with WC-⁠W powders prepared by the spontaneous infiltration process of the loose powder

    I Daoud, D Miroud, R Yamanoğlu
    International Journal for Science, Technics and Innovations for the Industry  ·  2017

     

19. Sintering Properties of Mechanically Alloyed Ti-⁠5Al-⁠2.5Fe

    R Yamanoğlu, E Efendi, I Daoud
    International Journal of Materials and Metallurgical Engineering  ·  2017

     

20. Ti5Al2.5Fe Alaşımının Sıcak Pres ile Sinterlenmesi

    R Yamanoğlu, E Efendi
    Metal Dünyası  ·  2016

     

21. Using Fly Ash as a Reinforcement to Increase Wear Resistance of Pure Magnesium

    E Karakulak, R Yamanoğlu, M Zeren
    International Journal of Materials and Metallurgical Engineering 10(7), 833–⁠836  ·  2016

     

22. Magnezyum ve Alaşımlarının Sıcak Pres Yöntemiyle Aluminyum Kaplanması

    Ö Ararat, R Yamanoğlu, M Zeren
    Metal Dünyası  ·  2016

     

23. Consolidation of Al-nanoSiC Composites by Spark Plasma Sintering

    R Yamanoğlu, E Olevsky
    International Journal of Materials, Mechanics and Manufacturing 4(2), 119–⁠122  ·  2016  ·  DOI

     

24. Production and Characterization of Hot Pressed Al-⁠Ni Alloys

    M Zeren, E Karakulak, R Yamanoğlu
    Metal 21  ·  2014

     

25. Saf Magnezyumun Sıcak Pres ile Yoğunlaştırılması

    M Zeren, E Karakulak, R Yamanoğlu
    Metal Dünyası  ·  2013

     

26. Alüminyumun Mikroyapı ve Sertliğine Nikelin Etkisi

    M Zeren, R Yamanoğlu, E Karakulak, FG Koç, YS Ergün
    Metal Dünyası No. 225, 76–⁠78  ·  2012

     

27. Atomize Tozlarda Hızlı Katılaşma

    M Zeren, E Karakulak, R Yamanoğlu
    Metal Dünyası  ·  2012

     

28. Gümüş Tozlarının PREP Atomizasyonu ile Üretimi

    M Zeren, R Yamanoğlu
    Metal Dünyası  ·  2011

     

29. Bakırın Geri Dönüştürülerek Kullanımı

    M Zeren, E Karakulak, R Yamanoğlu
    Recycling  ·  2011

     

30. Metalik toz işleme teknolojisi prosesleme kademeleri açısından parametrik ilişkiler

    Ş Karagöz, R Yamanoğlu, ŞH Atapek
    Eskişehir Osmangazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 22, 77–⁠87  ·  2009

     

31. Solidification and Microstructural Characterization on Atomized Powders

    Ş Karagöz, R Yamanoğlu, ŞH Atapek
    Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 15(3), 309–⁠316  ·  2009

     

Book Chapters

9 chapters · 2023–2024

1. Basınç destekli sinterleme tekniklerinde mikroyapıya genel bir bakış

   R Yamanoğlu
   Multidisipliner Yaklaşımla Güncel Mühendislik Problemlerinin Analizi UBAK Yayınevi, pp. 50–61 · 2024

    

2. Investigation of hot press coated Ni-⁠Hard alloy on the corrosion performance of different iron substrates

   HI Yavuz, O Muratal, C Duran, E Bayram, FG Koç, S Gümüş, R Yamanoğlu, A Baki
   Metalurji ve Malzeme Mühendisliği Yaz Yayınları, pp. 1–14 · 2024

    

3. Enavision 250 metal yazıcı ile üretilen nikel esaslı Inconel 718 alaşımının yorulma dayanımının incelenmesi

   İ Gökalp, ÜG Başçı, E Avcu, H Kaya, R Yamanoğlu
   Malzeme ve Metalurji Mühendisliği Yaz Yayınları, pp. 31–42 · 2024

    

4. SLM ile üretilen IN625 alaşımı için ısıl işlemin mekanik özellikler üzerine etkisi

   R Yamanoğlu, İ Gökalp, M Kıraç
   Teori ve Uygulamada Mühendislik Alanında Yaşanan Gelişmeler Yaz Yayınları, pp. 233–249 · 2023

    

5. Nikel krom esaslı dental malzemeler

   Z Keskin, S Gümüş, R Yamanoğlu
   Teori ve Uygulamada Mühendislik Alanında Yaşanan Gelişmeler Yaz Yayınları, pp. 215–231 · 2023

    

6. CoCr alaşımının SLM ile üretim parametrelerinin mikroyapı üzerine etkisi

   M Kıraç, İ Gökalp, Y Yıldıran Avcu, R Yamanoğlu
   Malzeme ve Metalurji Mühendisliği Alanında Farklı Yaklaşımlar BİDGE Yayınları, pp. 7–20 · 2023

    

7. Spintronik aygıt uygulamaları için katkılı ZnO seyreltilmiş manyetik yarıiletkenlerin sıcak pres yöntemi ile üretilmesi ve yapısal özelliklerinin incelenmesi

   İ Candan, HI Yavuz, R Yamanoğlu
   Doğa ve Mühendislik Bilimlerinde Güncel Tartışmalar 10 BİDGE Yayınları, pp. 240–256 · 2023

    

8. Dental uygulamalarda kullanılan CoCr alaşımının tribolojik özelliklerinin incelenmesi

   İ Gökalp, M Kıraç, E Avcu, R Yamanoğlu
   Doğa ve Mühendislik Bilimlerinde Güncel Tartışmalar 12 BİDGE Yayınları, pp. 114–123 · 2023

    

9. Babit tozunun gaz atomizasyonu ile üretimi ve saf demirin aşınma özelliklerine etkisi

   O Muratal, R Yamanoğlu, E Avcu, İ Gökalp, HI Yavuz, Y Gönülalan, ME Kurban, E Bayram
   Doğa ve Mühendislik Bilimlerinde Güncel Tartışmalar 8 Bilgin Kültür Sanat Yayınları, pp. 633–642 · 2023

    

Conference Papers

The full list of about 100 papers presented at national and international scientific meetings is available on the AVESİS profile.

All publications on AVESİS