
KOCAELI UNIVERSITY · METALLURGICAL AND MATERIALS ENGINEERING
3D Optical Profilometry
Non-contact 3D surface measurement and analysis with the Sensofar S mart 2

Non-Contact 3D Surface Measurement
The Sensofar S mart 2 3D optical profiler in our laboratory creates high-resolution 3D topography maps without touching the surface. Combining confocal, interferometry and Ai Focus Variation techniques in a single instrument, the system can measure a wide range of surfaces, from polished to rough and steeply sloped surfaces.
We provide surface roughness, wear track, step height and 3D topography measurements to companies, universities and research centers. Measurements can be planned together with wear tests on the tribometer and with indentation and scratch tests.
To request a measurement or analysis, please use the request form on the Laboratory page; we will contact you after reviewing your request.
Measurements We Perform
3D surface analysis from roughness to wear tracks
Surface Roughness and Topography
ISO 25178 · ISO 21920
Areal roughness
Areal surface texture parameters such as Sa, Sq and Sz are calculated according to ISO 25178.
Profile roughness
Profile parameters such as Ra, Rq and Rz are determined based on ISO 21920 (ISO 4287).
3D topography maps
3D views, cross-sectional profiles and height distributions of the surface are obtained.
Comparison of manufactured surfaces
Machined, ground, polished and additively manufactured surfaces are compared.
Wear Tracks and Dimensional Measurements
NON-CONTACT MEASUREMENT
Wear track analysis
After tribological tests, the depth, width and cross-sectional area of the wear track are measured to calculate the wear volume.
Step height
The height of coating edges, etched regions and similar steps is measured.
Indentation and scratch marks
The 3D profiles of nano and micro indentation imprints and scratch tracks are examined.
Measurement techniques and objectives
The technique (confocal, interferometry or Ai Focus Variation) and the objective (5×, 20× or 50×) are selected to suit the surface.
Applications and Standards
Which surfaces, which standards?
Materials and Industries
Metals and additively manufactured parts
Machined, ground, polished and additively manufactured metal surfaces.
Coatings and thin films
Coating surfaces, step heights and surface defects.
Tribological surfaces
Wear tracks, damaged surfaces and corrosion pits.
Biomaterials
Roughness analysis of implant surfaces and surface treatments.
Industries
R&D and quality control in the automotive, aerospace, biomedical, cutting tool, tooling and surface coating industries.
Standards
ISO 25178
Geometrical product specifications (GPS) - Surface texture: Areal.
ISO 21920
Geometrical product specifications (GPS) - Surface texture: Profile. Replaces ISO 4287.
ASTM G99 · DIN 50324
In wear tests performed to these standards, the wear volume is calculated from the wear track profile.
Samples, Reports and FAQ
From measurement request to report
Samples and Reports
Sample preparation
Sample size, surface condition and measurement areas are defined together with you during the request, based on your material and goals.
Reporting
Measurement results are reported together with the measurement conditions, 3D images and the calculated parameters.
Measurement request
Fill in the request form on the Laboratory page; we will review your request and contact you.
Frequently Asked Questions
What is the difference between optical and contact profilometry?
An optical profiler measures without touching the surface and provides areal 3D data in a single measurement. In contact profilometry, a stylus is moved across the surface, usually measuring a single profile line.
What is the difference between Ra and Sa?
Ra is the arithmetic mean roughness calculated along a single profile line. Sa applies the same definition to the entire measured area and describes the surface more representatively.
Which surfaces can be measured?
A wide range of surfaces can be measured, from polished and reflective to rough and steeply sloped surfaces; the appropriate technique and objective are selected according to the surface.
How long does it take to get results?
It depends on the number of samples and the measurement plan; you will be informed during the request.