top of page
yayinlar-banner-tane-yapisi.jpg

KOCAELI UNIVERSITY · METALLURGICAL AND MATERIALS ENGINEERING

Wear and Friction Testing

Testing and analysis services with the Anton Paar TRB³ tribometer

Anton Paar TRB³ tribometer in the Kocaeli University laboratory

Measuring Friction and Wear Behavior

 

The Anton Paar TRB³ tribometer in our laboratory measures the friction and wear behavior of materials and coatings under controlled conditions. In the ball-on-disk (pin-on-disk) configuration, a ball or pin pressed onto a rotating disk under a defined load slides at a set speed over a set sliding distance, and the friction coefficient is recorded continuously throughout the test.

 

The resulting wear track is then measured with the Sensofar S mart 2 3D optical profiler in our laboratory, and the wear volume and specific wear rate are calculated from this measurement. Friction and wear data are thus obtained in the same laboratory within a single test plan.

 

To request a test or analysis, please use the request form on the Laboratory page; we will contact you after reviewing your request.

Tests We Perform

From the friction coefficient to the wear rate

Friction and Wear Testing

 

BALL-ON-DISK · PIN-ON-DISK

 

Friction coefficient

The friction force is measured during the test, and the friction coefficient is recorded as a function of sliding distance or time.

 

Wear rate

The wear track profile is measured to calculate the wear volume and the specific wear rate (mm³/N·m).

 

Comparative testing

The tribological performance of different materials, coatings, surface treatments or process parameters is compared under the same conditions.

 

Counterpart selection

The material and diameter of the ball or pin are selected together with you according to the application and the relevant standard.

Measurement and Evaluation

 

ASTM G99 · DIN 50324

 

Test parameters

Normal load (up to 30 N), sliding speed, sliding distance and track radius are defined according to your material and goals; the rotation speed can be set up to 2000 rpm.

 

Wear track analysis

Wear tracks are imaged with a 3D optical profiler, and the track depth, width and cross-sectional area are measured.

 

Reported data

Friction coefficient curves, the mean friction coefficient, wear track profiles and the wear rate are reported.

 

Technical values are based on our instrument configuration and Anton Paar product data.

Applications and Standards

Which materials, which standards?

Materials and Industries

 

Metals and alloys

Titanium, aluminum and nickel alloys, steels and powder metallurgy parts.

 

Coatings and surface treatments

PVD/CVD hard coatings, DLC, thermal spray coatings and surface-treated materials.

 

Ceramics, polymers and composites

Ceramic and polymer-based materials and metal and ceramic matrix composites.

 

Biomaterials

Tribological behavior of implant materials and their coatings.

 

Industries

R&D and quality control in the automotive, aerospace, biomedical, cutting tool, machinery and surface coating industries.

Standards

 

ASTM G99

Standard test method for wear testing with a pin-on-disk apparatus.

 

DIN 50324

Tribology - Model tests of friction and wear in sliding friction of solids (ball-on-disk system).

 

ASTM G115

Standard guide for measuring and reporting friction coefficients.

Samples, Reports and FAQ

From test request to report

Samples and Reports

 

Sample preparation

Sample size and geometry, surface preparation and test conditions are defined together with you during the request, based on your material and goals.

 

Reporting

Measurement results are reported together with the test conditions and the values obtained.

 

Test request

Fill in the request form on the Laboratory page; we will review your request and contact you.

Frequently Asked Questions

 

What is the difference between ball-on-disk and pin-on-disk tests?

In both methods the counterpart is pressed onto a rotating disk under a defined load. In a ball-on-disk test the counterpart is a ball, while in a pin-on-disk test it is a pin with a defined tip geometry; the choice depends on the contact conditions and the relevant standard.

 

How is the wear rate calculated?

The wear volume is obtained by measuring the cross-sectional profile of the wear track. Dividing the wear volume by the applied load and the sliding distance gives the specific wear rate (mm³/N·m).

 

Can coatings be tested?

Yes. The friction coefficient and wear resistance of hard coatings, thermal spray coatings and other surface coatings can be measured. For coating adhesion, you can also use our scratch testing service.

 

How long does it take to get results?

It depends on the number of samples and the test plan; you will be informed during the request.

Contact

Kocaeli University

Faculty of Engineering, Block A

Department of Metallurgical and Materials Engineering

41001 İzmit, Kocaeli, Türkiye

Thank you for your message!

© 2026 Dr. Rıdvan Yamanoğlu · Kocaeli University

bottom of page